Creaflex®

Creaflex® - Special O-rings for extreme operating conditions

Chemical
Resistance

CREAFLEX® perfluoroelastomers offer universal chemical resistance - even in the most aggressive pumped media - and are reliable for high pressure and high temperature applications. The sealing systems meet the strict standards of purity and traceability of the materials used and have full FDA approval for perfluoroelastomers 21 CFR 177.2400 (d1); (d2).

scroll

Wide
Temperature insert
from -20°C to +320°C

Excellent
Hot water and
Steam resistance

Minimum
Compression set

Complete FDA
Conformity

Good price
Performance ratio

Long
Lifetime

For
High temperatures

Hardly any other medium causes more problems for O-ring seals than hot water and steam, especially when it comes to applications in the high-temperature range above 150°C. CREAFLEX® HT elastomers have a temperature resistance of up to +280°C. Leading manufacturers of pumps and valves have already successfully used CREAFLEX® HT elastomers.

scroll

Extremely high
constancy of
Temperatures up to
+280°C

Excellent
Hot water and
Steam resistance

Very good
Consistency in
aggressive media

Low remaining
Compression set
and high
constancy of
Aging

For
Low temperatures

CREAFLEX® LT elastomers exhibit extremely high temperature resistance down to -60°C, even with aggressive media. The performance and service life of valves, pumps and mechanical seals are significantly increased by the use of CREAFLEX® LT elastomers.

scroll

Extremely high resistance at temperatures down to -60°C

Very good
Consistency in
aggressive media

Long life

Elastomers change their mechanical properties at temperatures around freezing point. This has a massive influence on the sealing properties. At a low temperature of below -20°C, there is a risk that the elastomers of the O-rings will become irreversibly brittle. The consequences of damaged O-ring seals are leakages and thus a failure of compressors, pumps as well as valves.

Protection from explosive decompression

CREAFLEX® high-tech elastomers meet these extreme requirements safely and reliably and make a major contribution to the process reliability of the production plant.

scroll

Extreme resistance
against explosives
Decompression

Very good
Consistency in
aggressive media

Long life

In the oil and gas industry, extraordinary stresses are placed on the sealing material. Here, seals must function reliably with critical gases and at high pressures of up to 400 bar. When pressure is released quickly, conventional elastomer seals can be damaged by "explosive decompression". The consequences are enormous damage to pumps and pipelines. Immense costs are associated with the standstill of production plants.

CREAFLEX® high-tech elastomers meet these extreme requirements safely and reliably and make a major contribution to the process reliability of the production plant.

Explosive Decompression (ED) approval: NORSOK M-710 Rev2

Approval according to sour gas (H2S) resistance: NORSOK M-710 ISO 23936-2, NACE TMO187-2011 as well as API 6A

FDA compliance

The CREAFLEX® FFKM extraction data also meet the high requirements of the FDA registration for perfluoroelastomers according to CFR177.2400 (d1) and (d2). In some cases, the composites very significantly undercut the limits required by FDA approval.

scroll

Conformity for
FFKM, FEPM, FKM,
EPDM and HNBR

USP-VI approval for
all CREAFLEX®
Materials

Certificate for ASME
BPE-2016 USP(87)
+USP(88)

Very good
Consistency in
aggressive media

CREAFLEX® FDA-compliant materials are far below the required FDA limits and USP VI. Elastomers used in the food and pharmaceutical sector are usually subject to the strict regulations of USP and FDA approval. Createc is one of the few seal and O-ring manufacturers to have FDA conformity for all its elastomer materials FFKM, FEPM, FKM, EPDM as well as HNBR and supplies the seals in white or black on request.

Chemical resistance
High temperature
Cold flexibility
Explosive decompression
Approval according to FDA + USP VI

We are a young, successful company and distribute high-tech materials worldwide, offering our customers innovative high-tech solutions for the medical, biochemical, pharmaceutical and energy industries. The customer's needs are our focus. We provide competent and reliable advice based on in-depth industry knowledge and many years of application experience.

Suche